DESCRIPTION: Acryl Ted polyol/ isocyanate cured aliphatic polyurethane resin based, two pack incorporating premium grade weather resistant pigments.
USE: High performance floor for industrial steelwork, marine fabrications, offshore installations, building substrate, etc, where a highly decorative and chemical resistant film is required.
FEATURES

• High build mastic topcoat with capability to achieve very glossy, smooth, chemical and abrasion resistant finish
• Does not chalk despite exposure to UV light
• Resistant to splash and spillages of large variety of dilute acids, alkalis, detergents, hydrocarbon solvents, petroleum products, minerals and vegetable oils. No change after 1 month immersion in Ca(OH)2 solution or city water
• Superlative gloss and color retention on outdoor exposure
• High stain and impact resistance
• Recoat able
• Heat resistance up to 1000C

COLOUR: Red oxide, Blue, Green, Grey, Clear, other as require
FINISH: High Gloss
TECHNICAL DATA

• Packing: 1Kg/set, 5Kgs/set, 20Kgs/set
• No. Of Components: Two
• Viscosity (28 oC): Approx. 72 KU
• Mixing Ratio: 4 (Base): 1 (Hardener) by volume
• Pot Life (28 oC): 4 hours
• Specific Gravity: Approx 1.20
• Solic Content: Approx 54%
• Flash point: 30oC 

APPLICATION DATA

• Application method: Brush, Roller 
• Thinner: PU Thinner 5200
• Thinning ratio: Ready use. Approx. 5 to 15% if desired
• Shelf life: 12 months
• Coverage: 5m2/kg/coat
• Dry film thickness: 50-75 microns/coat
• Drying time: Surface dry: 30 minutes at 28oC
• Hard dry: 8 hours at 28oC
• Recoating interval: Min 8 hours

PAINTING SPECIFICATION
Surface preparation: For general usage such as tie coats, etc, ensure a clean, dry substrate
STORAGE:Cool, dry, well ventilated shaded areas
SAFETY PRECAUTION:

• No excessive heat, sparks or flame
• Use adequate ventilation.
• Avoid prolong contact with skin.
• Avoid breathing of vapor and spray mist.
• Use protective equipment. If the material comes in contact with the eye, immediately wash in running water for 20 minutes and obtain medical treatment.
• Observe all safe precautions

Immersion in Acid solution: